Introduction of color steel sandwich panel production line:
The continuous production line for rigid polyfoam laminated panel with color steel facings is a kind of specialized equipment used for producing color-steel sided sandwich panels with the middle layer of anti-combustion polyurethane, polyisocyanurate or phenolic foam plastic. The thickness of the produced sandwich panel ranges from 0 to 10 mm, the width between 750 to 1000 mm and the length on request.
The color steel sandwich panel production line is mainly applied to make wall panels of steel structure and roof panels, being also able to make various other insulation panels if replacing facing sheet. Its operation principle is as follows: rigid polyfoam raw materials, according to a certain blending ratio, are delivered into mixing head to agitate through metering pump unit on the injection machine and then uniformly injected onto the bottom facing sheet of sandwich panel. After the injection the bottom facing sheet shall move toward the double-belt conveyors together with panel’s top facing sheet. Between the two conveyors, injected raw material is foamed and hardened into shape. At the end of the line, the formed sandwich panel is cut into preset length by an automatic tracking cutter.
The color steel sandwich panel production line has already passed the hi- and neo-tech product identification carried out Jiangsu Economic and Trade Commission and Jiangsu Science and Technology Department, being listed as a main nation-level new product and evaluated as one of the first-batch high and new products of Jiangsu Province in the year of 2004（Product No. : 041111G0025N）.
Main Technical Parameters
Reciprocating times of injection head per minute more than 60
Production line speed 1～4 m/min
Laminating length of the laminator 18 m
Maximum temperature of hot-air circulating 70 ℃
Maximum rising height of the top conveyor 250 mm
The total capacity for the production line 85~125 kw
External dimensions 70000×5300×3800mm( length × width × height)
Weight 40 tons
