Our PU sandwich panel has high strength and durability of insulating ability. In addition, we use the PIR (Poly Isocyanurate) which it has the resistance to flame so the panel has the high resistance to flame. Also HCFC-14b the blowing unit as well as the Pentane the eco-friendly material will make more safety and better environment as it’s the “GREEN” unit.
Polyurethane Sandwich Panel Production Line consists of Un-coiler that inputs and releases coil, Roll Forming Unit that makes shape of coil, PU Forming Unit that sprays PU solution, Laminating Unit that makes the shape of sandwich panel, Panel Cutting Unit that cuts the fabricated sandwich panel, Cooling Conveyor Unit that finishes products hardening the cut panel sufficiently at intervals, Auto Stacking Unit that loads the finished panels, and Panel Packing Unit that packs the loaded panels with plastic wrap and discharge them.
-
Producing speed : Min. 2meter/min ~Max. 15meter/min
-
Length of Double belt conveyor : 20~40meter
-
Factory Electricity : 380V x 50Hz x 3Ph (User’s choice available)
-
Controlling Electricity : A.C. 220V (User’s Choice Available)
-
Factory’s Area : 130~150(Length) x 30m(Width) x 6m(Height)
-
Pressure of compressed air : Over 6 bar required
-
Production : 4~5 person
-
Panel length : Min. 2,000mm in auto mode
Max. 18,000mm (±3mm) -
Effective width : 1000mm for roof
600mm~1200mm for normal wall -
Panel thickness : Available thickness from 30~200mm
(depended upon heights of the side sealing block.) -
Top and Bottom layer : Pre-painted Galvanized coil
For ASTM A 526-85, JIS G 3302 SGCC
Thickness = 0.4mm ~ 0.7mm -
insulation : PUR hardened and PIR / Pentane
-
Density of Insulation : 30kg/m3 ~ 50kg/m3
