Principle of operation & Introduction: this series of pulling 5-digit counter is used to record the cumulative time of the reciprocating mechanical. There's no reset device. When the time of count reaches 99999, re-counting can begin from 00000. Its counting wheels are driven by sprockets inside. When the arm on the right side of the meter is pulled out, the drive mechanism connected to arm leads counting wheels to make the addition counting. It is mainly used in high-voltage switches, and it can also be applied in testing equipment, printing equipment, etc
technical parameters:
models: various models are available for this series.
Specification of the display digital H × L: 4mm × 2mm
Temperature range - 10degres- + 50degres
maximum counting 99999
rate transmission 1:1
speed of counting =300fois RPM =300fois RPM =300fois RPM
Angle pulling Angle pulling. Max = 1 °, Angle pulling min. = 7 °
Torque =4.18N•cm
features draft of law, the arm rotates in the meaning needle of worldPulling left arm rotates counterclockwise needle of the world.
Weight ˜23g
this series of products can be designed and manufactured according to the customer's needs.
