Principle of operation & Introduction: this series of mechanical counter is used to record cumulatively to mechanical reciprocation. There no device reset, when count reaches 99999, both re-counting can begin from 00000 other traffic. When the meter arm is pulled out, drive connected to the arm leads counting wheels to count. It is used primarily in the high-voltage switch, and it can also be used in the test equipment, the printing equipment, etc
technical settings:
specifying the digital display H × W 4 mm × 2 mm
Ambient Temperature - 10degres- + 50degres
capacity of maximum counting 99999
rate of transmission 1:1
speed of counting =300 times/min
Angle pulling Angle pulling Max = 41 ° ,Angle pulling min. = 38 °
Torque =5 N•cm
characteristics Pulling aside right, the arm rotates needle in the world. Pulling aside right, the arm rotates in the opposite direction of the needle in the world; Left side pulling, arm rotates the world needle, pulling left side, the arm rotates in the opposite direction of the needle in the world.
Weight ˜23g
this series of products can be designed and manufactured according to the customer's needs.
