LAB THINK PARAM MFY - 01 Leak Tester is used to test sealing bags, bottles, boxes, tubes, curasses etc. It is also used to test the tightness after the drop test, tensile strength test.
Technical characteristics;
Degree of vacuum: 0-90kPa
Accuracy: ±1% of the strength of reading
Vacuum chamber size: Diam. 270 mm × 210 mm (H)
Diam.360mm x 585mm (H) (standard)
Diam.460mm x 330mm (H) (optional)
Note: other sizes to order
The source of gas pressure: less than 0.7MPa (7kgf/cm2)
Gas connector: Diam.6mm pipe polyurethane
Dimension: 300mm (L) × 380mm (B) × 450mm (H)
Power supply: AC 220V 50 Hz
Net weight: 12kg
