ALLOW VAC - V1 permeability Tester uses to measure the transmission of gas, the coefficient of solubility, diffusion and permeability of plastic sheets, laminated sheets, materials to high barrier.
Technical characteristics:
Measuring range: normal 0.1~100,000cm3/m2•24h•0.1Mpa(volume)
Maximum: more than 600,000 cm3 / m2•24h•0.1Mpa (volume expansion)
PS: Volume Selections carried out by software
Temperature control range: indoor temperature ~ 50 ° C
Vacuum in the test chamber level: less than 20Pa
Sample Diam.97mm size,
Measured area: 45.45 cm2 (70mm diameters)
Quantity of samples: 1
The test gases: O2, N2, CO2 etc. (clients bring their own gas source)
Test pressure:-0.1Mpa ~ +.1MPa
Gas source pressure: 0.4mpa ~ + 0.6mpa
Cap size: Diam.6mm pipe polyurethane
Size: 680mm (L) × 565mm (L) × 550mm (H)
Power supply: AC 220Vac, 50 Hz
Net weight: 130kg
