Introduction
Water sensor is an intelligent security equipment that can transmit the Z-Wave network which has particular frequency. Different countries or areas, the radio frequency of Z-wave is different. In the Z-Wave network communications, water sensor can work with any Z-wave main controller. In the Z-Wave network communications, water sensor can send messages to the Z-wave main controller, and realize association with other devices through the Z-wave network. In the communication with the Z-wave main controller, the water sensor can send messages to the Z-wave main controller, but it can not receive messages from the Z-wave main controller. When the water sensor is triggered, the LED light keeps on and the Buzzer will make sound. The water sensor sends messages to the Z-wave main controller at the same time, the Z-wave main controller will display the current status of water sensor. Water sensor is battery powered, is small and can be installed easily.
Parameters
- Model: ZIB-WD01Z, ZIB-WD02Z
- Compatible with 300 series and 500 series
- Battery specification: CR2(3.0V)x 1
- Power Consumption: 0.13W
- MAX current: 35mA
- Battery life: 37 months (standby)
- Radio Protocol: Z-wave
- Wireless distance: 50m
- Operation temper: 0-40℃
- Storage temperature: 0-60℃
- Product size(LWH): 68mm x 68mm x 34mm
Features
• When alarm triggered, LED light flashes in the detection area.
• Easily install with screws or sticker .
• Detecting the location of the overflow timely and accurately , reduce the economic losses caused by the overflow of water
• Compatible with any Z-Wave main controller.
