1.TTL-232R Converter Cable provides a USB to TTL Serial interface with various end connectors.
2.On board FT232RL provides single chip USB to asynchronous serial data transfer interface.
3.Entire USB protocol handled by the electronics in the cable USB.
4.Connect directly to a microcontroller UART or I/O pins.
- 5V CMOS drive outputs and 5V safe TTL inputs makes the TTL-232R easy to interface to 5V MCU''s.
- +5V or +3.3V output allows external logic to be powered from the USB port.
7.6 way outputs provide Tx, Rx, RTS#, CTS#, VCC and GND (except Audio Jack which provides only TX,RX and GND).
8.3 way Audio Jack connector provides Tx, Rx and GND.
9.Low USB bandwidth consumption.
10.UHCI / OHCI / EHCI host controller compatible.
11.USB 2.0 Full Speed compatible.
12.-40°C to +85°C operating temperature range.
13.Cable length is 1.80m (6 feet).
14.Custom versions also available (subject to MOQ).