Introduction
Salt water spray test device: This device is used to test the surface treatment of various materials. The so-called treatments include coating, electroplating, films of organic and non-organic materials, anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.
Feature & Parameters
- The whole system using PVC plate, lined with the use of advanced three-dimensional reinforcement ring technology, structure and strong real, never deformation.
- Five direction heating system to ensure heat distribution within ±1oC.
- Highly advanced spray nozzle with accuracy of spray misting within ±0.3ml/80cm2.
- Saturated air with Henry's law. In order to heated humidification, and provided the necessary laboratory humidity.
- Temperature control uses P.I.D temperature controller within ±0.3oC accuracy.
- The only use of early warning device test solution is too low, when the test solution is only enough for 5 hours and then spray the buzzer supplement will notify the user to ensure that the test of the value of the continuous spray.
- The only use the full detection system, when a failure occurs, you can display or alarm lights inform.
- With a spray and standing time period setting (for CAPA, SAE, ASTM).
- Meets ASTM B117-03 the new improved design.
MODEL STD-9701 STD-9701C
TEST APPLICABLE NSS, ACSS, CASS CORK
TEST TEMPERATURE 35oC±1oC or 50oC±1oC 38oC±1oC 80%~99%RH
INSIDE DIMENSION 900x600x500(WxDxH) mm 900x600x500(WxDxH) mm
OUTSIDE DIMENSION 1420x780x1280(WxDxH) mm
VOLUME 270 LITER
WEIGHT 150KGW
TEST SPECIMAN (150x70mm) at angle of 20o±5 48 PCS
SOLUTION TANK CAPACITY 30 LITER
TESTING TIME 180HR
POWER CONSUMPTION 220V SINGLE PHASE 3KW