Description
YL-SG referred to as retarder, it is a set-retarding admixture, and it can slow down the hydration of cement, prolong set time, and extend the working life of concrete for long periods without any negative influence on the concrete quality. It complies with ASTM C 494, Type B, GB8076-2008 and GB50119-2003.
Uses
YL-SG is beneficially used in hot weather conditions in order to overcome accelerating effects of higher temperatures. It can be widely applied in large masses of concrete. Freshly batched concrete for long hauls, shot concrete, and cast concrete.
Advantages
Extending concrete initial setting time for proper finishing without cold joint during hot weather.
Increasing the workable time of concrete up to several hours.
Providing flexibility in planning and scheduling of concrete pours.
Applicable for massive concrete, cast concrete and large area construction.
Dosage
0.01% to 0.06% by weight of cement. Exact dosage rates are dependent on the type of effect sought, quality of cement and aggregates, water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes.
Properties
Item Specification
Visual Appearance White or yellowish crystal powder
Loss on drying (%) 0.5 Max
Purity (%) ≥98
Reducing Substances (%) ≤0.7
Heavy Metal (Pb), ug/g ≤10
Sulfate,% ≤0.05
Chloride,% ≤0.07
Lead, ug/g ≤2
Arsenic, ug/g ≤2
PH Value 6.2-7.8
Technical Data Sheet
Items Criteria Test Results
Ratio of Bleeding Rate (%) ≤100 49.1
Setting Time Difference (min) Initial >+90 +340
Compressive Strength Ratio (%) 3 days ≥100 135
7 days ≥100 130
28 days ≥100 123
Shrinkage (% 28 days ≤135 112
Alkali Content (%) 2.50
Alkali Content per m3 (kg) ≤1.0 0
Chloride Ion Content 0.40
Chloride Ion Content per m3(kg) Prestress Concrete