Model KL-300T
Applicable fibers SM(ITU-T G.652),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T G.655)
Fiber cleaved length 8~16mm(Coating diameter: 250µm)
16mm(Coating diameter: 250 ~ 1000µm)
Fiber diameter Cladding diameter:80 ~150µm Coating diameter:100~ 1000µm
Fiber Count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Splicing time Typical 9 sec, with standard SM fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss >60dB
Storage of splice result 4000 results, 20 parameter per result
Fiber display and magnification 300X(X or Y view),150X(X and Y view)
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
No.of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen 5.6 TFT inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals USB 1.1 and VGA
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50?, respectively, Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions 150mm(L) x150mm (W) x150mm (H)
Weight 2.7 Kg excluding battery,3.2 Kg including battery
