Brief Introduction
GST108 adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any remote phones.
Main Features
- GSM alarm transmission, without connecting telephone lines and be not afraid of
cutting line.
-
The host automatically stores system status, while its power is off.
-
The system equips backup rechargeable battery .It can work while the external power
is off.
-
When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set phone numbers, and meanwhile dials its pre-set mobile phone numbers automatically and drive wiretap.
-
Remote arm/disarm, and set the host by telephone
-
You can increase/decrease detectors
-
Support remote arm/disarm by telephone
-
Can connect with the alarm center through GSM network.
Specification
Output power: DC12V
Input power: AC110V to 240V,50Hz or 60 Hz
Working hours of standby Battery(DC8.4V):
More than 15 hours
Wireless frequency for above
accessories:315MHZ/433MHZ