JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The modules build in SAM slot. It could operate contact smart card according to ISO7816. The module and antenna is integrated. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. There is ferrite plate between main PCB and antenna, so such design applies to some metallic-around systems.
Qualifications:
PCD: NXP RC522,RC523
Working frequency: 13.56MHz
Supported standard: Mifare Classic, ISO14443A, ISO14443B
Card supported: Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL CPU cards(both ISO14443A & ISO14443B)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF. The default state can be set
Power supply: DC 5V (±0.5V)
Interface: IIC/UART/USB (select while place order)
Communication rate: IIC400Kbps; UART19.2Kbps/115.2Kbps;USB: USB 1.1 HID class
Max.command length: 254 Bytes
Interface level: UART/IIC: 3.3V (TTL level; 5V tolerance)
Static power consumption: 150mA
Operating distance: 80mm (depending on card)
Dimension: 50mm50mm7.5mm
Weight: About 20g
ISP: Supported
Operating temperature: -25 to +85°C
Storage temperature: -40 to +125°C
RoHS: Compliant
