-
The enclosure cabinet is made by the steel with ten times bent for highly
cccstrength, so the structure is firm, able to carry a heavy load. The cost of this
cabinet is lower than the PS cabinet. -
We apply SPCC cold rolled steel or stainless steel for all of our products, 2mm
thickness of front door, 1.5mm thickness of panels, 2.5mm galvanized mounting
plate. -
The size of ES and PS series cabinets can be matched with each other, and
the parts and accessories are versatile. They can be quickly installed. -
The front door is of single or swing doors, with an Angle of 130 degrees, the
height of the door to the ground is 25mm.the reinforcing frame is inside the
front door, equipped with to 25 mm spacing of mounting holes. In addition, the
front door provides mounting crossbar to strengthen it and more flexible to
binding cables. -
The rear panel is fastened by bolts and fasteners.
-
Mounting plate can be adjusted back and forth for the distance of multiple
of 25mm, the door, panels are all able to earth. There are 3 adjusted fixed shelf
at the bottom for cable arrangement.
