2-3 mm depth seam clearance
Clean the dust
Unscrew the bottle cap and pull out the stopper
Install blend nozzle and tight it firmly
Pull off the power rod and load the product into the glue gun
Cut the glue nozzle by seam width, incline face down
Discard materials(first 40cm)
Direct construction without masking paper
Sewing with sealer uniformly
Press seam immediately
Press one line of the cross firstly
Press another line from middle to both sides
Remove rest glue with shovel after 24 hours cured
Wipe off the residue with alcohol or white vinegar
Complete
