LAB THINK PARAM HTT - L1 hot adhesion Tester is used to perform tests of adhesion to flexible and semi-hard materials. It is also used for peeling, shearing, traction and another test for adhesive tape, membrane, plastic film, paper and other flexible materials.
Technical characteristics:
Adjustable temperature: up to 250 ° C (accuracy ±0. 2 ° C)
Heat sealing pressure: 0.05 ~ 0.7MPa
Sealing time: 0.1 ~ 999.9 s
Adhesion hot time: 0.1 ~ 999.9 s
Test force: 0 ~ 200N (30N 50N optional 100N)
Accuracy: ±1 %
Resolution: 0.01 N
The traverse speed: 100 150 200 300 500 (mm/min)
Type of heat sealing: simple surface or double surface
Sample width: 15mm or 25mm or 25.4 mm (optional)
Rail travel: 500mm
Compressed gas pressure: 0.05 MPa ~ 0.7 MPa,
The gas source connector: Diam. 6mm tube polyurethane
Power supply: AC 220V 50 Hz
Size: 1170mm (L) × 360mm (B) × 460mm (H)
Net weight: 45 kg
