GRIDSEED 350+ KH/S ASIC - SPECS
Product Details:
The world’s first ASIC miner that can operate in three modes - latest 55-nm ASIC with 3 supported modes: Mode 1: Scrypt (Litecoin/Dogecoin, Etc) only Mode 2: SHA (Bitcoin) only Mode 3: SHA & Scrypt combined.
-Each Gridseed Unit is capable of 350+ KH/S Application Specific Integrated Circuit (ASIC) Scrypt and SHA crypto-currncy mining.
-Each Gridseed can mine at 300+ KH/S Scrypt and 10GH/S SHA
-Each Unit comes with 5 chips These units are able to be overclocked to get 350+KH/S or 11.25+GH/S (unmodded) Each GC3355 chip is capable of producing up to the following (5 GC3355 chips per unit):
Scrypt only mode: 70+ KH/S (x5 = 350+ KH/S) SHA only mode: 2.25 GH/S (x5 = 11.25 GH/S)
Combined Scrypt & SHA mode: 1.6 GH/S SHA & 60 KH/S Scrypt (x5 = 8Gh/s SHA+ 300Kh/s Scrypt)
All speed figures are approximations. 300 KH/S is the manufacturer’s specification. Some software will allow over-clocking of these units but please do this at your own risk.
These are great for Mining both Scrypt and SHA.
Every Unit is tested to ensure you do not receive a bad product.
Note: you will need a power supply for each unit.
Power supply specs: 12 Volt 7 Amp adaptor: 5.5mm x 2.1mm. Amps can be lower (approx ~1500 ma) in Scrypt mining mode.
Power consumption for LTC only mode: About 10 watts (much more efficient than GPU mining!)
Power consumption for BTC+LTC (or BTC only) mode: About 60 watts
Power supply: Not included. 12 volts and at least 6 amp power supply required. Power connector is a 2.5mm/5.5mm barrel plug.
Included in the box:
- 1 Gridseed 5-chip miner
- 1 Mini-USB Cable
- 1 Power cord.
