Place of origin : GOLDEN TRADE INTERNATIONAL

Filter Mesh Test Stand

Profile : Manufacturer - Producer | Ref : PSL417142YH | Country : China | Currency : | Incoterm: | Export: Yes | Import: Yes

Introduction
Filter mesh test stand is based on relevant standards and specification to test quality control factors: pipe leakage, dust generation, flow test, resistance test, the change of different filters, flow control.

Structure
· Power section
· Aerosol generator section
The aerosol generator can consecutive produce stable DEHS particles (particle size range 0.3-3μm) .
· Particle counter section
The sampling flow of the particle counter is 2.83L/min. The particle counter is specially suitable for particle size 0.3μm-10μm.
· Fixture and structure section
The pipeline is made of 305 stainless steel, anticorrosion and antirust, with consideration of convenient pipeline replacement ( when testing different size of filters).
· Flow monitoring section: Using V cone flowmeter for flow detection.
· Differential pressure monitoring section:
Using imported DWYER electronic differential pressure transducer for pressure measurement.
· Flow control section
Electric control valve to automatically regulate the flow
· Data processing:
Including PLC, software and electric control

Standards
ISO 11155 Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration
QC/T 795-1:2007 Road vehicles - Air filters for passenger compartments - Part 1: Dust filtration test.

Technical Parameters
Item Parameters
Basic Parameter Power supply Three phase AC, 380V±5% 50Hz±2Hz ,5.5kw
Condensed air 4-8kg/cm2
Dust source DEHS
Anti-electric shock Rate Grade I
Environment condition Temperature 15-25 ℃
Relative humidity ≤75%RH
Air pressure 68kPa-106kPa
Flow Test range 150-600m³/h
Test accuracy ±5%
Test stability ±3%
Resistance Test range 0-250pa
Test accuracy 0-100pa,±5pa;>100pa ,±5%
Aerosol Uniformity ≤±15%
Particle counter calibration Calibrated in according to JIF 1190-2008 (particle counter calibration specification )
Repeatability of counting efficiency Efficiency lower than 40%, ≤±15%;
Efficiency higher than 40%, ≤±5%

Type of ad : Product Offer

Ad reference : PSL417142YH

Advertiser reference: REF-204638

Category: Other measuring instruments

Keywords : filter mesh test stand | filter testing | dust filtration test.

Other ads from the advertiser that may interest you

Why import with Golden-Trade ?

Buying internationally has never been easier and safer:

A single point of contact

A single point of contact
from start to finish

A simple interface

A simple interface
to monitor your operations

An end-to-end management

Door-to-door logistics
we deliver wherever you want

An insurance policy

Performance guarantee
up to €7.5 million

Import credit

Import credit
Buy now and pay within 180 days max *under conditions