A:Brief description:
DSHD-261A Automatic Pensky-Martens Closed Cup Flash Point Tester is designed according industrial standard SH/T0315 Technical Specifications of Closed Cup Flash Point Tester.
The main function of DSHD-261A Automatic Pensky-Martens Closed Cup Flash Point Tester is to make determination of closed cup flash point of the petroleum products according to national standard GB/T 261 or ASTM D93.
B:Main advantages:
- Simulation tracking displays function curves of heating up and test time.
- Equipped with the English prompt function of mis-operation.
- Equipped with prompt function of test date,test time and other parameters.
- Automatically calibrate the effect of atmospheric pressure to test and calculate the corrected value.
- Differential coefficient detection.Automatically correct the system deviation.
- Automatically open the lid,detect the flash point and print test data.
- The test arm rises up and lowers down automatically.
- Igniting with electric igniting gun,forced air cooling.
C: Main technical specifications and parameters
- Power supply:AC(220±10%)V, 50Hz.
- Temperature measuring:Measuring range: Room temperature-250°C.
Range of flash point: 41°C-250°C.
Flash point no more than 104°C: Error 2°C.
Flash point>104°C: Error 6°C.
Resolution: 0.1°C.
Accuracy: 0.5%. - Basic parameters:Heating rate: Correspond with GB/T261
Igniting mode: Electric ignition(Gas flame 3mm-4mm)
4. Ambient temperature: no more than 40°C - Relative humidity: no more than 80%
- Power consumption of overall unit: no more than 350W
D:More Open Cup flash point tester:
DSHD-261 Pensky-Martens Closed Cup Flash Point Tester
DSHD-261-1 Pensky-Martens Closed Cup Flash Point Tester
DSHD-261A Automatic Pensky-Martens Closed Cup Flash Point Tester
DSHD-261D Fully-automatic Pensky-Martens Closed Cup Flash Point Tester
DSHD-5208 Rapid Closed Cup Flash Point Tester
DSHD-5208A Rapid High-temperature Closed Cup Flash Point Tester
DSHD-5208D Rapid Low-temperature Closed Cup Flash Point Tester
