Characteristics
CSPOWER Deep Cycle series 12V Sealed free maintenance lead acid batteries up to 300Ah (D Type, "D"
Behind the model name stands for deep-cycle application) are designed to have a large amount of stored current discharged between charging sessions, with very heavy non-porous battery plates to withstand repeated major discharging and charging cycle(deep cycle). It uses a different chemistry for the plates active paste material, and a slightly stronger electrolyte than normal battery electrolyte, which allows for a much longer life in deep cycle applications.
Advanced Features:
- Sealed and maintenance free operation
- Non-Spillable construction design
- Safety valve installation for explosion proof.
- High quality and high reliability.
- Exceptional deep discharge recovery performance.
- Low self discharge characteristic.
- Flexibility design for multiple install positions
- The operating ambient temperature -40 to +65
- Long life span 10-12 years
- Using oxygen recombination technology: Maintenance-free
- Pb-Ca-Sn alloy for plate grids: Less gassing and less self-discharging
- High quality AGM separator: Extend cycle life and prevents micro short circuit
- ABS material: Increases the strength of battery container. (Flame-retardant ABS is optional)
- High purity raw material: Ensures low self discharge rate
- Silver-coated copper terminals, brass insert terminals and lead terminals improve the electric conductivity
Application
Engine starting, Communication equipment; Fire & security systems; Uninterruptible power supplies; Telecommunication systems; Electronic cash registers; Electronic test equipment; Processor based office machines; Control equipment; Electric powered bicycle and wheelchairs; Geophysical equipment; Marine equipment; Medical equipment; Portable cine & video lights; Solar powered systems; Television& video recorders; Vending machines; Alarm Systems, Computers; Power Tools; Emergency Lighting Systems; Toys; Geophysical Equipment; Vending Machines; Other standby or primary power supplies.
Maintenance:
- Check the tightening of connections.
- Every month, it is recommended that the total voltage at the battery terminals be measured.
- Once each year, it is recommended that the voltage of each cell in the battery should be read off.
- A difference of plus or minus 2.0% between these individual voltages and the average voltage may be
Observed. This is due to the gas- recombination process. - A check on capacity (independent operation on load) can be performed once or twice per year.
- Safety: When carrying out any work on the battery, the applicable safety standards should be followed.
Note: It is recommended that a battery log be maintained, and that records should be kept of the total voltage - Measurements, any mains failures, major battery discharges (current and time) etc.
- The main factors causing reduction in the life expectancy
