Compact Heat Pipe Solar Water Heater
Tech Data:
- Inner water tank:Stainless Steel, SUS304-2B, SS316L,Enamel;Thickness,1.2-2.5MM.
- Outer water tank:Color Steel or Stainless steel;Thickness, 0.40MM.
- Insulation layer: Polyurethane foam;Thickness, 30-60MM.
- Frame:Galvanized Steel; Aluminum Alloy; Stainless Steel; Angle, As your requirement.
- Vacuum tubes: ALN/AIN-SS/CU layer; 47-1500 OR 58-1800 with Heat Pipe.
- Heating element, Mg Rod, Reflector and Controller can be provided.
- Working Pressure :0.6Mpa ,Testing Pressure :1.0Mpa.
Characteristic:
- Evacuated tube, aluminum fin and heat pipe arc closely integrated, realizing faster heat transfer and lower loss.
- There is no water in tube, no filthy, anti-freeze, unlimited time of putting water and pressure operation, even there is tube broken, and the whole system still can work.
- The system is same as tap water which would make the bathing very comfortable.
- With the T/P valve, air vent valve makes the system work very stable and safety.
- Can be used all year round in the cold climate.