Place of origin : GOLDEN TRADE INTERNATIONAL

automotive interior fogging testing machine

Profile : Manufacturer - Producer | Ref : PSL461032YH | Country : China | Currency : USD | Incoterm: EXW | Export: Yes | Import: Yes

Fogging tester is used to determine the windscreen fogging according to ISO, DIN, ASTM and other automotive standards. The equipment has a compact design with the heating bath and cooling bath integrated in one casing. For cooling the water bath, the instrument is normally connected to tap water of max 18 °C. If the tap water is too warm, a model EB 03C can be supplied with a built in cooling system with Peltier elements.

Working Principle:

The main frame of the tester includes a water sink fully filled with specified ethylene glycol, which can reach a high temperature. At the time of testing, leather specimens are put in the six standard glass containers filled with high temperature liquid, and the stainless steel containers are placed above each glass. Relying on the constant water flow distribution, the temperature can maintain at 20℃ constantly, and it can be adjusted through the regulation device connected to the main frame. This controlled environment condition will generate a layer of “fog” on the surface of specimens. The operator can determine the fogging characteristics of materials based on gravimetric analysis method or refraction method.

Test Methods:
It applies to the following test methods:
1) Gloss Method: the sample cup is heated by the fog evaporated gas condensing on cold glass by glass gloss values were compared before and after condensation and calculated, the sample can be drawn into the fog value.
2) Gravimetric method: the sample cup is heated by the fog evaporated gas condensing on cold aluminum foil, aluminum foil condensed by weighing before and after the change in weight, the sample can be drawn from the atomization - the weight of condensate.
3) Haze method: the sample cup is heated by the fog evaporated gas condensing on cold glass, through the haze value before and after the glass condensate compare and calculate, the sample can be drawn into the fog value.

Standards
DIN 75201 Determination of the fogging characteristics of trim materials in the interior of automobiles
ISO 6452 Rubber or plastics coated fabrics-determination of fogging characteristics of trim materials
in the interior of automobiles
SAE J1756 Test procedure to determine the fogging characteristics of interior automotive materials
QB/T 2728 Leather-physical and mechanical test-determination of fogging characteristics.
BS EN 14288 Leather - Physical and mechanical tests - Determination of fogging characteristics
PV 3920 Determination of fog value (F) of non-metallic interior materials
PV 3015 Non-metallic materials for interior trim-determination of condensable constituents.
ES-X83231 Standard test method-For fogging of interior materials
NES M0161 Interior materials fog test method
D45 1727 TRIM MATERIALS AND PARTS FOR INTERIOR AND

Type of ad : Product Offer

Ad reference : PSL461032YH

Advertiser reference: REF-203727

Price: 1-1

Currency : USD

Incoterm: EXW

Minimum purchase quantity: 1 set

Category: Optical measuring instrument

Keywords : automotive interior fogging testing machine

Other ads from the advertiser that may interest you

Why import with Golden-Trade ?

Buying internationally has never been easier and safer:

A single point of contact

A single point of contact
from start to finish

A simple interface

A simple interface
to monitor your operations

An end-to-end management

Door-to-door logistics
we deliver wherever you want

An insurance policy

Performance guarantee
up to €7.5 million

Import credit

Import credit
Buy now and pay within 180 days max *under conditions