developed for use in all public toilets where special sanitary conditions and low-maintenance are required: Airports, Hospital, Shopping malls, Hotels, Restaurants, Sports complexes, cultural and educational institutes, government buildings, office buildings, train and bus stations, etc.
- Power: 6~12V battery or hard wire
- Dimension: 450 490 150mm
- Drive : 6V or 12V D/C geared motor
- Components
- The seat-ring encased in a plastic sleeve film
- Motor module to drive the reels
- The two reels to feed and rewind plastic sleeve film.
- The housing separated upper and lower contains the reels and power module
- The seat-ring is attached to lower housing
- Operating
when activated by the wave of a hand on the housing cover mounted sensor, dispenses a sleeve film from the fresh roll. At the same time, the used sleeve film is cut as it is drawn onto the rewinding reel in the housing It is easy, touch free! - Replacing Cover
Replacing Cover sleeves is very easy. When the roll of clean Cover sleeves is used up, simply replace the empty roll with a new Cover sleeve. It takes not more than a minute and requires no special equipment of training.
