Control mode
On-off control mode
AI PID Control with Auto Tuning(AT)
Measurement
accuracy
0.25%FS ±1
Resolution
0.1°C
Response time
≤1s ( when digital filter parameter dL=0)
Input
Thermocouple(with J1 module): K, S, R, T, E, J, N
RTD: Pt100, Cu50
Linear voltage:0~1V, 0~5V,1~5V,0~100mv,0~20mv
Linear Current:0~10Ma,0~20mA, 4~20mA
External input(install I4 module in MIO):0~20MA, 4~20mA or two line transmitter
Input range
K(0~1300°C), S(0~1700°C), R(0~1700°C), E(0~1000°C), J(0~1200°C),Cu50(-50~150°C)
PT100(-200~800°C), Linear input:-9990~30000 units
Output
(modularized)
Relay output (NO+NC): 250VAC/2A or 30VDC/1A
TRIAC Switch Output
TRIAC zero Crossing trigger output
SSR Voltage output: 12VDC/30mA (used to drive SSR)
Linear current output: 0~20mA, 4~20mA (The output voltage of X module ≥10.5V;
and that of X3 module ≥10.5V.)
General specifications
Voltage: support AC85-265V,50/60Hz or DC24V.
Power consumption: ≤3W
Electromagnetic compatibility (EMC) : ±4KV/5KHz according to IEC61000-4-4;
4KV according to IEC61000-4-5.
Operating Ambient : temperature -10~60°C; humidity ≤90%RH
