Overview
BD-1000M-4TX-POE series is a 5 port (1FX+4TP) 10/100/1000M PoE (PSE) Ethernet Switch. The optical fiber port can greatly extend the transmission distance limitation of normal CAT5e UTP cable. All the four 10/100/1000Mbps UTP RJ-45 ports supports full duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode).
Complied with IEEE802.3at and IEEE802.3af standard, the PoE(PSE) Ethernet Switch is a Power Sourcing Equipment (PSE) which combines data transfered over cable with 48V (typical) power supply, providing power to IEEE802.3at /IEEE802.3af powered device (PD) over CAT5e UTP cable (cable length up to 100meters / 330feets). All the four UTP RJ-45 ports are organized to be PoE output port and each PoE port can output up to 60Watts (DC48V/1.2A) power into CAT5e twisted-pair cable.
Features
Support one 1000Base-FX fiber optical port and four 10/100/1000Base-T UTP RJ-45 ports
4 ports IEEE802.3at / IEEE802.3af PoE/PSE output
(high power output up to 60Watts per port)
Support IEEE 802.3z/AB 10/1001000Base-
1000Base-SX/LX/ZX standards
Supports IEEE 802.3x flow control
Supports 9216 bytes jumbo packet length
Built-in 1Mbits SRAM for packet buffer, with
4K-entry lookup table
1000Base-FX Optical Ethernet interface:
Connector: SC,FC or ST are optional
Wavelength: 1310nm,1550nm or 850nm(can be chosen by customer)
Optical fiber category:
Ø single-mode 8.3/125, 8.7/125, 9/125, 10/125um
Ø multi-mode 50/125, 62.5/125, 100/140um
multi- mode connection: transmitting range can reach 5 kilometers as farthest;
single-mode connection: transmitting range can reach 100 kilometers.
10/100/1000Base-TX Ethernet Interface：
Connector: UTP RJ45 connector
Data Rates:
10/100/1000Mbps(802.3 10Base-T/802.3u 100Base-T)
100Mbps (100Base-FX)
Power over Ethernet Output:
Pin Assignment and Polarity:4/5 (V+),7/8 (V-)
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery
Over current protection: auto recovery
