YST302 series are RFID reader/writer module which pick or send command by USB(HID) and UART ports. YST302 series meet kinds of international contactless IC card standards. Also YST302series can support kinds of cards from suppliers. YST302 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. YST302 series RF antenna is separated from the module. The module is connected to the antenna by the 50ohm cable. It is with flexible antenna size and layout. Qualifications
Where it can be used: bus, access control system, bank, water meter, etc.
PCD: NXP OM9663
Working frequency: 13.56MHz
RF standard: ISO14443A, mifare, ISO14443B, ISO15693, ISO7816
Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm
Operating distance: 80 mm (depending on card and antenna design)
Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm
Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.
Auto detecting card: yes, default OFF
Interface: USB(HID) or UART
Max command length: 1024 Bytes
Interface level: 3.3V
Power consumption: 50mA
Dimension: 25mm16mm 3.5mm
Package: Surface mount
Weight about: 10g
Operating temperature: -25～+85℃(-77～+185℉)
Storage temperature: -40～+125℃(-104～+257℉)
ISP: Yes
Module YST302
RF base station OM9663
Interface USB(HID), UART
RF standard ISO14443A, ISO14443B, ISO15693 Mifare
Reading distance 80mm
PICC MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B
I.CODE 1
I.CODE SLI
I.CODE SLI-S
TI Tag-it series
ST LRI series
